Furnace Installation & Replacement in New Jersey

Family-Owned Since 1992

NJ Master HVAC License #19HC00594000

4.9-Star Google Rating From 912+ Reviews

Free In-Home Installation Estimates

Financing Options, Including 0% Interest for Up to 60 Months on Qualifying Work

A new furnace should be sized for your home rather than simply matched to the BTU rating of the old equipment. During an in-home assessment, Coastal evaluates the home’s heating load, insulation, window exposure, ductwork, floor plan, available fuel, and household comfort needs. Proper sizing helps prevent an oversized furnace from turning on and off too frequently or an undersized system from struggling to maintain the desired temperature.

Sizing is only one part of choosing a furnace. Efficiency also matters. AFUE, or Annual Fuel Utilization Efficiency, indicates how efficiently a furnace converts fuel into heat over a heating season. Standard-efficiency furnaces generally use conventional venting, while high-efficiency condensing models recover more heat from exhaust gases and often require PVC venting and condensate drainage.

Gas furnace replacement is common, but some homes may be better suited to electric heating, an oil-to-gas conversion, or a dual-fuel system that combines a heat pump with a furnace. The right option depends on the home, available utilities, existing equipment, heating needs, and project goals.

For homes in Coastal’s service area, equipment selection can also account for New Jersey temperature swings, seasonal humidity, and, in communities closer to the shore, salt-air exposure.

If you are comparing system types, review our heat pump vs. furnace comparison or explore other residential HVAC options.

Furnace replacement in New Jersey generally requires construction permits and applicable inspections rather than being treated as a simple appliance swap. Coastal operates under NJ Master HVAC License #19HC00594000 and coordinates the permit and inspection steps required for the installation.

Depending on the project, inspection requirements may address venting, gas piping and shutoffs, electrical connections, combustion safety, and condensate drainage. Replacing a conventional furnace with a high-efficiency condensing model may also require new intake and exhaust venting, often using PVC, along with proper condensate drainage.

In homes where the existing furnace vents through a chimney, the venting arrangement may also need to be evaluated, especially if the chimney serves another fuel-burning appliance.

Furnace replacement cost depends on the equipment selected and the scope of the installation, including system capacity and efficiency, ductwork changes, venting, gas or electrical modifications, and permit requirements. Coastal provides a free written estimate based on the actual project scope rather than a generic online price range.

Financing options are available, including 0% financing for up to 60 months for qualifying customers and projects, subject to credit approval.

How do I know whether to replace my furnace or keep repairing it?

Replacement may be worth considering when a furnace is approaching the end of its expected service life, requires frequent repairs, struggles to heat the home evenly, or no longer performs as reliably as it once did. An in-home evaluation can compare the system’s condition, repair needs, capacity, and comfort performance before you decide.

If repair cost is an important part of the decision, review our furnace repair cost information for additional context. Coastal can then provide a written furnace replacement estimate based on your home and the actual project scope.

How long does a new furnace installation take?

Many straightforward furnace replacements can be completed in one day. Installation may take longer when the project requires ductwork changes, new venting, gas or electrical work, permit coordination, equipment relocation, or a fuel conversion.

Coastal reviews these project details before work begins so the expected timeline reflects the home’s actual requirements. Final testing and system setup are completed before the furnace is placed into regular use.

Do I need a permit to replace a furnace in New Jersey?

Yes. Local permits and applicable inspections are generally required for furnace replacement work in New Jersey. Specific requirements can vary by municipality and by the scope of gas, electrical, venting, or ductwork changes.

Coastal coordinates the permit and inspection process as part of installation planning. The applicable inspection process reviews items such as system connections, venting, combustion-related requirements, and required clearances.

What AFUE rating should I choose for a New Jersey furnace?

There is no single AFUE rating that fits every home. The right choice depends on your heating needs, budget, existing venting, installation requirements, and long-term efficiency goals. Higher-efficiency condensing furnaces can require different venting and condensate drainage than conventional systems.

An in-home evaluation can clarify which efficiency level fits your home and project. Higher-efficiency equipment may also qualify for utility or manufacturer incentives available at the time of purchase, subject to current program rules and equipment eligibility.

Can I replace an oil furnace with a gas furnace or a heat pump?

Yes, an oil furnace can sometimes be replaced with a gas furnace or heat pump. Feasibility depends on factors such as natural gas availability, ductwork condition, electrical capacity, equipment location, and the home’s heating load. Each option has different installation and operating requirements.

A heat pump can also be paired with a furnace in a dual-fuel system. Review our heat pump vs. furnace comparison to understand how the two system types differ before discussing the options for your home.

Does Coastal offer furnace financing and ongoing maintenance?

Yes. Financing options are available for qualifying furnace installation and replacement projects, subject to approval and current program terms. After installation, a Coastal maintenance plan can provide routine system care and priority scheduling for future service.